Contact Form
Whitby has established neighbourhoods and newer subdivisions, and the right heating and cooling plan is different in each. Our HVAC design in Whitby
works out what a building needs before any equipment is chosen: calculated loads, a duct layout and the HVAC permit drawings your building department asks for. We are fully licensed by the HRAI and BCIN registered for HVAC design work, and our team has over 20 years of hands-on experience. This page is about design, so you can see exactly what a plan covers and what it does for your project.
Request a Whitby design quote
Heat Loss Calculation for Whitby Homes
Every plan begins with a heat loss calculation in Whitby
, a room-by-room measure of how much heat the building loses in winter through walls, windows, roofs and air leaks. The same work covers heat gain, the heat a house picks up from summer sun and warm air, so cooling is sized with the same care as heating. Homes in Port Whitby, Brooklin and the neighbourhoods between them differ in age, insulation and window area, so they lose and gain heat very differently, which is why a rule of thumb often leads to oversized equipment. With real figures, we size the furnace, heat pump or air conditioner to the house and avoid the short cycling and uneven rooms that come with a unit that is too large. A correct HVAC design in Whitby
starts here.
Duct Design in Whitby
A good system also needs air that reaches every room. A duct design in Whitby
sizes each run for the airflow its room requires, places registers where they blend the air and plans returns so doors can stay closed without starving a bedroom. We draw the layout before work begins, so the trades know where ducts, vents and ventilation units go and the system runs quieter once it is installed. Tighter houses also need fresh air on purpose, which is where mechanical ventilation planning comes in, and larger or more complex homes gain the most from an HVAC design in Whitby
that settles these details on paper. For ductwork specifics, see our ductwork services
.


Permit Drawings for Whitby Projects
New builds, additions and major renovations usually need mechanical calculations and drawings before a permit is issued. Our team prepares the HVAC permit drawings and supporting calculations against the Ontario Building Code, so the package is ready to hand to the building department. Because it comes from the same design that sizes your equipment, nothing is recreated for the paperwork. Treating HVAC design in Whitby
as a permit-ready package also lets you share the same documents with your builder and your installer. Our HVAC design service across Durham Region
follows the same process.
Contact us
Arrange a design consultation

HVAC Design Whitby: What Your Plan Includes
- Room-by-room load figures: Heating and cooling requirements for every space, with heat gain included, ready for any installer.
- Duct layout drawings: Run sizes, register positions and return paths on one clear plan.
- Equipment sizing guidance: The capacity the home needs, so competing quotes can be compared fairly.
- Ventilation plan: Fresh air provisions, including ERV or HRV placement where the project calls for it.
- Permit-ready documents: Calculations and HVAC permit drawings organized for the building department.
- Code review: Mechanical details checked against what the reviewer will look for.
Taking a Design Further
A finished design is something you own. You can take it to any qualified installer and compare quotes on the same specification, or ask us about carrying it through. If the plan leads to a new system, our HVAC installation services in Whitby can build it to the drawings. Everything in this HVAC design in Whitby
is written down, so the finished work has a clear standard to be measured against. Send us your house plans and we will tell you what the design involves.
Send us your house plans


